Joined in 2023 
82 
63 About this deal
If your original fence posts are concrete, you will need to use that the screws specifically made for concrete that I mentioned before. You’ll also need a carbide-tipped drill bit to be able to drill holes into the concrete. 7. Paint The Extenders
Two other reasons rest on transportation and availability issues. Carrying and connecting two 8-foot lengths is easier than transporting a 16-foot length, especially if traversing woodland trails. The availability of long 4x4s at many small suppliers is often limited due to low demand, making splicing a necessity. RepairFirst, it’s easier to install your sleeve plumb and level (which is essential) if you have a sturdy base for your sleeve post. It also makes it virtually impossible to pull your sleeve post out of the ground once the concrete around it is set. That’s about it when it comes to our simple DIY removable fence post design. As you can see, it’s relatively easy to manufacture, lends itself to several applications, and can be manufactured from readily available materials. A tapered scarf or scarph joint is a diagonal joint cut on a 1:8 to 1:12 slope and is as old as the half lap joint. It is commonly found in beams, skids or other horizontal members joined together with wooden pegs or bolts and plates. The scarf joint requires some modifications when used to extend a post. Because your removable fence post sleeve will be subject to the elements, we recommend you go with hot dip galvanized steel and possibly use a high-quality anti-corrosive paint before you place it. This will help to protect the sleeve from corrosion from water. Weatherables is known for creating pragmatic and minimalist sleeves for people on the go, and its line of weatherable 4x4 fencepost sleeves definitely falls in line with that reputation. The weatherable 4x4fence post sleeve is good for a lifetime warranty and it fits perfectly. Make sure this fits by entering your model number. Further, it is manufactured from premium - quality, durable pvc vinyl maintenance free.
There should be two bolt holes for each connected piece. Most Codes require 1-1/2” between the edge of the wood and bolt hole, which doesn’t leave much space to off-set fasteners on a 4×4. It comes with a 20-year post-replacement guarantee, so you can rest assured that your posts are protected for years to come.It’s very important that you don’t fill the center of your sleeve with concrete or gravel, though because this is where you will set your removable fence post when it’s in position. The simplest way to create a removable fence post in areas that don’t get snow and ice in winter is to cast a sleeve into the ground and then use that sleeve to house the post when it’s in position. Whatever material the posts are made of, it would be smart to drill holes where you want the screws placed first. Then go ahead and put the screws in place. Doing this will prevent damaging the screw. It will also ensure that screw goes in the right direction. Make sure that the drill bit you use to create the holes is the same size as the screws you’re going to use. A hollow 10” to 24” metal pipe, 1” to 1-1/2” in diameter, inserted into a hole drilled vertically into the center of the ends of the two 4×4 to be butt joined, provides additional lateral reinforcement. The pipe is secured into the vertical holes with construction adhesive. Two 1/2″ through bolts are inserted into the top and bottom post pieces in holes bored through the wood and pipe. There are several ways to remove the wood to do the lap; however, the lengths and location do play a part. A basic hand saw, hammer, and chisel, or all three have worked for centuries. Electric or battery-powered skill saws or reciprocating saws are a modern convenience that may make the task easier. I’ve seen a good hand sawer do up a set of half-laps in the same amount of time as a reciprocating saw, and with much more accuracy.
Related:
Great Deal 
New Comment